Dehumidification
To avoid condensation in the enclosure, we recommend using our enclosure dehumidifying devices. The air in the enclosure is routed over a cold surface in the internal circuit of the dehumidifier, which actively generates condensate. The condensate then flows down through the condensate hose. A bulkhead fitting connection or a drainage element, which the condensate hose can be connected to, is installed in the lower area of the enclosure.
- 3 different versions for various applications
- Significant energy savings compared to conventional heating methods
- Connection via spring-cage terminals to 24 V DC
- Partial installation on the side wall or complete installation in the enclosure possible
- Hose with 1 meter length, bulkhead fitting connection, and a mounting bracket for attaching the device are included in the delivery contents
Dehumidifier for Enclosures PSE 30
€252.90
- Power input
- 47 W
- Degree of protection (outside)
- IP 55
- Housing
- stainless steel
Dehumidifier for Enclosures PSE 30L
€324.90
- Power input
- 50 W
- Degree of protection (outside)
- IP 55
- Housing
- stainless steel
Dehumidifier for Enclosures PSE 30LP
€452.40
- Power input
- 56 W
- Degree of protection (outside)
- IP 65
- Housing
- stanless steel
OUT-FIT OF-M25-W
€59.00
- Category
- Entwässerung und Druckausgleich
- Thread
- M25 x 1,5
- Assembly
- Side wall, outside
- Note
- Suitable for control cabinets standing on the floor
DRAIN-FIT DF-M20-BA
€37.00
- Category
- Entwässerung und Druckausgleich
- Thread
- M20 x 1,5
- Assembly
- Bottom, outside
- Note
- Without pressure equalization Water on the bootm is drained off + hose connection
OUT-FIT OF-M20-BI
€48.00
- Category
- Entwässerung und Druckausgleich
- Thread
- M20 x 1,5
- Assembly
- Bottom, inside
- Note
- Lock nut included Flange FL-M20-BI is an accessory
OUT-FIT OF-M20-BA
€58.00
- Category
- Entwässerung und Druckausgleich
- Thread
- M20 x 1,5
- Assembly
- Bottom, outside
- Note
- Water on the bottom is drained off + hose connection
Pressure equalization unit DEM 12 MS
€150.80
- Category
- Entwässerung und Druckausgleich
- Thread
- M12 x 1,5
- Wrench size
- SW 16
- Configuration
- Brass nickel-plated
Pressure equalization unit DEM 40
€111.90
- Category
- Entwässerung und Druckausgleich
- Thread
- M40 x 1,5
- Wrench size
- SW 46
- Configuration
- Polyamide
Pressure equalization unit DEM 20
€61.40
- Category
- Entwässerung und Druckausgleich
- Thread
- M20 x 1,5
- Wrench size
- SW 24
- Configuration
- Polyamide
Pressure equalization unit DEM12
€31.70
- Category
- Entwässerung und Druckausgleich
- Thread
- M12 x 1,5
- Wrench size
- SW 16
- Configuration
- Polyamide
Thermo - Hygrostat ETUH 22
€83.00
- Category
- Thermostate und Regler
- Switching function
- Changeover
- Temperature range
- 20- 90% r.H./ 0 - 60°C
- Switching differences
- 1K
- Dimensions (L x B x H)
- 69 x 53 x 50mm
Peltier-Controller TPC 300
€249.00
- Category
- Thermostate und Regler
- Switching function
- switching heating + cooling
- Temperature range
- -20 - +70°C
- Sensor
- 2 Temp. sensors
- Switching capacity
- 16 A (bei 24V DC)
Hygrostat HYW 90
€48.00
- Category
- Thermostate und Regler
- Switching function
- Changeover
- Temperature range
- 40 - 90% r.H.
- Switching differences
- 5%
- Sensor
- polyamide band internal
- Switching capacity
- AC: 24 - 250V / 2(0,2)A
- Dimensions (L x B x H)
- 64 x 37 x 46 mm