Dehumidification
To avoid condensation in the enclosure, we recommend using our enclosure dehumidifying devices. The air in the enclosure is routed over a cold surface in the internal circuit of the dehumidifier, which actively generates condensate. The condensate then flows down through the condensate hose. A bulkhead fitting connection or a drainage element, which the condensate hose can be connected to, is installed in the lower area of the enclosure.
- 3 different versions for various applications
- Significant energy savings compared to conventional heating methods
- Connection via spring-cage terminals to 24 V DC
- Partial installation on the side wall or complete installation in the enclosure possible
- Hose with 1 meter length, bulkhead fitting connection, and a mounting bracket for attaching the device are included in the delivery contents
OUT-FIT OF-M25-W
€68.50
- Category
- Entwässerung und Druckausgleich
- Thread
- M25 x 1,5
- Assembly
- Side wall, outside
- Note
- Suitable for control cabinets standing on the floor
DRAIN-FIT DF-M20-BA
€42.50
- Category
- Entwässerung und Druckausgleich
- Thread
- M20 x 1,5
- Assembly
- Bottom, outside
- Note
- Without pressure equalization Water on the bootm is drained off + hose connection
OUT-FIT OF-M20-BI
€56.00
- Category
- Entwässerung und Druckausgleich
- Thread
- M20 x 1,5
- Assembly
- Bottom, inside
- Note
- Lock nut included Flange FL-M20-BI is an accessory
OUT-FIT OF-M20-BA
€67.50
- Category
- Entwässerung und Druckausgleich
- Thread
- M20 x 1,5
- Assembly
- Bottom, outside
- Note
- Water on the bottom is drained off + hose connection
Pressure equalization unit DEM 12 MS
€18.00
- Category
- Entwässerung und Druckausgleich
- Thread
- M12 x 1,5
- Wrench size
- SW 16
- Configuration
- Brass nickel-plated
Pressure equalization unit DEM 40
€14.00
- Category
- Entwässerung und Druckausgleich
- Thread
- M40 x 1,5
- Wrench size
- SW 46
- Configuration
- Polyamide
Pressure equalization unit DEM 20
€7.50
- Category
- Entwässerung und Druckausgleich
- Thread
- M20 x 1,5
- Wrench size
- SW 24
- Configuration
- Polyamide
Pressure equalization unit DEM12
€4.00
- Category
- Entwässerung und Druckausgleich
- Thread
- M12 x 1,5
- Wrench size
- SW 16
- Configuration
- Polyamide
Hygrostat HYW 90
€57.50
- Category
- Thermostate und Regler
- Switching function
- Changeover
- Temperature range
- 40 - 90% r.H.
- Switching differences
- 5%
- Sensor
- polyamide band internal
- Switching capacity
- AC: 24 - 250V / 2(0,2)A
- Dimensions (L x B x H)
- 64 x 37 x 46 mm